Tabla de contenido
Idiomas disponibles
Idiomas disponibles
9.
Change or turn the blades (11).
Always turn ore replace both blades.
➢
10. Ensure that the blades (11) are placed on the
pins in the clamping jaw first, followed by the
blade carriers (12).
11. Reinsert the blade unit from the side into the
planing shaft.
12. Ensure that blade carrier and blades do not
protrude at the sides from the shaft body.
13. Using the open-end wrench (C) provided,
tighten the hexagon head screws (9) from the
center outward.
14
Fig. 6: Changing / turning the blades
Fig. 7: Inserting the blade unit
Fig. 8: Tightening hexagon head screws
ZH320 Ec
11/2021
Tabla de contenido
