Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ZH320 Ec
3.6 Residual risks
The existing residual risks include:
- Touching the running planing shaft below the base plate.
- Touching the sharp planing blades when the planing shaft is stopped.
- Touching the sharp planing blade edges when changing blades.
- Touching the running planing shaft through the chip ejector.
- Ejected improperly inserted planing blades.
- Breakage and ejected planing blade fragments.
- Machine or workpiece flung away during insert planing.
- Impaired hearing when working without hearing protection for long periods of time.
- Emission of harmful wood dusts during longer operation without extraction.
4
Setup / adjustment
4.1 Mains connection
Prior to starting up the machine, check to ensure that the mains voltage corresponds to the operating voltage
specified on the rating plate of the machine.
4.2 Routing of the connecting cable
11/2021
Warning
Risk of injury when working with the machine
Even when the machine is used as intended and in compliance with the safety
regulations, there are still residual risks caused by the intended use, which can
have consequences for your health.
Observe the safety instructions and information in these instructions.
➢
Always be extremely careful and cautious when you work with the machine.
➢
Warning
Electric shock when cutting into the connecting cable
The connecting cable can impair safety functions and work functions and
get into contact with the cutting tool. Cutting into the connecting cable of
the machine puts the metal parts of the machine under tension and
causes an electric shock. There is a risk of injury for the user.
When working, pay attention to the way the connecting cable is
➢
routed.
Never cut into the connecting cable of your machine.
➢
11
Tabla de contenido
