Technical Data - monzana MZPP28 Manual De Instrucciones

to liquids or be immersed in them. Regular maintenance helps to ensure the safety of the product
and increases its service life.
TROUBLESHOOTING
Problem
Pump with no action
Pump works audibly,
but no water
flowing
Low flow rate
Pump stops suddenly
Sand in pool water
More sand in water
Heightened pressure

TECHNICAL DATA

Item number
Mains voltage
Max. power
Protection category
Protection class
Max. delivery rate
Sand filling quantity (not included in delivery)
Connection cable length
Total weight
Tank volumes
Possible cause
No power available
Air in system (pump/tank)
is
Hoses kinked, pump is taking
in air
Suction height
incorrect suction hose
Suction/delivery
exceeded
Valve/hose/filter dirty
Overheating has triggered the
thermal switch
Fresh sand in filter
Incorrect quartz sand used
Blockage
High contamination
Solution
Insert plug or check fuses if
necessary
Ventilate the pump as described
and if necessary also the tank.
Check and, if necessary, correct
and seal straightened connections.
Possible hose leak
too high, Adjust the position of the pump
Use vacuum-safe suction hose
height Adjust
pump/system
Check and clean if necessary Use a
vacuum-safe suction hose
wait approx. 30 minutes
•
use vacuum-safe suction hose
•
check clogged pipes
•
This is normal when fresh sand is
being used. Proceed as described.
It will settle of its own accord.
Sand too fine, purchase coarser
sand from a specialist dealer
Cleaning
Cleaning and rinsing
994615
220–240 V ~50/60 Hz
600W
IPX5
I
15900 l/h
50kg max.
1.8m
23kg
60L
18
the position of
www.DEUBAXXL.de
the