Becken BAC4256 Manual De Instrucciones página 24

Note:
1. In the AUTO mode, the air conditioning can automatically choose
the Cooling, Fan or Heating mode by sensing the difference between
the current ambient room temperature and the set temperature on the
remote control.
2. In the AUTO mode, you cannot change the fan speed, as this is
automatically controlled.
3. If the AUTO mode is not comfortable for you, you can choose
another, more comfortable mode manually.
4. Press the ON/OFF button to start the air conditioning.
Note:
In the FAN mode, the set temperature is not displayed in the remote
control and you are also unable to control the room temperature. In
this case, only step 1, 3 and 4 may be performed.
24
AF Manual instruç o ̃ e s user split BAC4256_BAC 4257_BAC4258_BAC4300 EN.indd 24
Cooling /Heating/Fan operation
Make sure the unit is plugged in and
switched on.
1. Press the MODE button to select
COOL, HEAT (available in cooling &
heating models only) or FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature
can be set between 17º C ~ 30º C in 1º C
increments.
3. Press the FAN button to select the fan
speed in four steps - Auto, Low, Med or
High.
22/01/2019 16:54