Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. INSTALLATION
We recommend using a trusted Rointe supplier for installation of the product. Find the
nearest one by calling us onor using the locator on
Prior to installation, please locate the metal tag located at the back of the product and
note the product reference and serial number. You will need this information to register
your guarantee. See section 9 for help on how to register the guarantee.
Do not install the product directly over an electrical outlet or junction box. Do not install
the product or use it outdoors. Do not install directly under a shelf. This product is
designed to be installed on an interior wall using the ROINTE template, the installation
kit and the fixings supplied. Do not install the product in such a way that it encounters
the power cable.
This product must never be installed with its control box in a raised position. The vertical
product must not be used horizontally. During installation, use shims to prevent the
control box from resting on the floor.
OK
The mains connection must be made in compliance with the voltage indicated on the
product's technical data label. This product is intended to be permanently connected to a
fixed installation. The supply circuit of theproduct must be fitted with a single-pole circuit
breaker with a contact separation of at least 3 mm. The product should be installed, if
possible, away from draughts (windows, doors) or anything else that could interfere with its
32
Tabla de contenido
