Mounting The Fascia Doors - Infiniton FGC-BB690 Manual De Usuario

Mounting the fascia doors

Fig. 9 - Fitting the decor door bracket
Remove the white decorative cover (Fig. 8) by lifting it upwards.
Obtain the below measurements:
Dimension B = Measure
from the underside surface
of kitchen unit to the bottom
of fixing bracket.
Fig. 8
Dimension C = Measure
from the underside surface
of kitchen unit to the top of
next unit door.
Unscrew and remove the
Fig. 9
nuts and washers from the
top of the appliance door to remove
the bracket.
1
Fig. 10 - Fitting the decor door
bracket
2
Subtract C from B and put the
fixing bracket (2) in place using this
measurement for vertical position
and place to the centre for horizontal
Fig. 10
position. Secure the fixing bracket (2)
using screws(1).
Fig. 11 - Fitting the decor door
Place the decor door onto the
appliance door by inserting
adjustment bolts into the slots on the
Fig. 11
fixing bracket.
20