Installation; Electrical Connection; Unpack The Machine; Install The Upper Panel - GreenWorks Pro GPW3001CO Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SYM-
SIGNAL
BOL
CAUTION
3

INSTALLATION

3.1

ELECTRICAL CONNECTION

This machine has a precisely built electrical motor. It should
be connected to a power supply that is 120V, 60 Hz, AC only
(household). Do not operate this machine on direct current
(DC). A considerable voltage drop will cause a loss of power
and the motor will be overheated.
3.1.1
PREPARE A DRIP LOOP
Recommend the use of a drip loop as below so the water can
not run along the power cord even possibly reach the
electrical outlet and plug.
WARNING
Keep the extension cord clear of the working area. Position
the cord so that it will not get caught on lumber, tools, or
other obstructions while you are working with a power tool.
Failure to do so can result in serious personal injury.
3.2

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
If the parts are damaged, do not use the machine.
If you do not have all the parts, do not operate the
machine.
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
English
MEANING
(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.
14
7
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.3

INSTALL THE UPPER PANEL

2
23
1. Aligh the screw sleeves of the front panel (2) with the
screw holes on the upper handle (23).
2. Tighten them with a Phillips screwdriver (not included).
3.4
INSTALL THE SPRAY GUN
HOLDER
3
7
EN
Tabla de contenido
loading

Este manual también es adecuado para:

Pwa211

Tabla de contenido