CASO DESIGN KM 1800 Black-G Manual Del Usuario página 25

PLEASE NOTE
 Defective components must always be replaced with original repla-
cement parts. Only such parts will guarantee that the safety requi-
rements are fulfi lled.
 Use only the supplied accesorries. The warranty of the unit expires if
you use accessory from other manufacturers.
 Carefully clean all components that will come in contact with food
before fi rst use.
 Unplug the device immediately after use.
 Do not process bones, nuts or other hard ingredients.
 Mincer: Process sinewless, boneless and fatless meat in pieces.
 Use the device continuously for a maximum of 10 minutes.
Then let the device cool down for 30 minutes.
 Never immerse the device, cord or plug in water or other liquids
and do not place in the dishwasher.
 Do not overload the device and do not let it operate un-loaded.
 Be sure the parts are properly assembled to original base and in
place.
 Do not use appliance for other than intended household use.
 Device is not intended to be operated by means of an external
timer or separate remote-control system.
 Do not overload the feeding tube and do not press the ingredients
down too hard with the pusher, this could damage the device.
 Always use only one attachment (mixing element, grating
attachment, mincing attachment or Pasta Maker).
 We recommend using the mixing bowl when using accessories to
avoid injury from the rotating drive shaft.
 The maximum fi lling capacity of 2 kg must not be exceeded.
 Do not process frozen food. The device could be damaged.
 The device will turn itself off in case of overheating. Unplug the
device and let it cool down before using it again.
 Do not move the device during operation.
CASO KM 1800 Black-G
DE
EN
FR
IT
ES
NL
PT
PL
SE
25