DDF40
3.4 Specific safety rules
Operation information:
- Keep your hands away from drilling area and drill bits.
- During the drilling process, never reach underneath the workpiece (risk of injury!).
- Never hold the workpiece in your hands or across your leg while you are drilling. Secure the workpiece on a
stable support.
- Hold the power tool by the insulated grip surfaces when you perform work that involves a risk of the tool
hitting hidden power lines or its own power cord.
- Maintain the work area in a clean and tidy state. Ensure that there are no live lines in the work area
(extension cables, own connecting cable).
- Prior to starting drilling, tighten the height and angle settings.
- Check the workpiece for foreign bodies. Do not drill into metal parts, such as nails.
- During your work routines, pay attention that you always put down the machine in a safe place when it is not
in use. This prevents injuries due to the machine falling down.
- After drilling, the motor unit must automatically move back to the home position. The drill bits are
then completely inside the protective cover. If this is not the case, switch off the machine immediately and
repair it before you use it again.
01/2022
RETAIN THESE INSTRUCTIONS!
11