3
4 2
④ x 4
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Insert four Barrel Nuts (5) into the Bottom Stretcher (C). Make sure that the threaded holes point towards
the entry of the bolts.
3. Align and attach the Bottom Stretcher (C) between the Legs (B) with the end dowels fully inserted. Insert
four 3" Bolts (4) with the Washers (2 and 3) through the mounting holes on the Legs (B) and screw into
the inserted Barrel Nuts (5).
Assembly Instructions
5
B
DO NOT fully-tighten the nuts or bolts initially until all the nuts or bolts are
5
C
② x 4
4
4
2
3
B
⑤ x 4
③ x 4