Cleaning And Maintenance - hillvert HT-HOWSON-18E5 Manual De Instrucciones

3.4. Cleaning and maintenance

a) Disconnect the mains plug before each cleaning operation and when the
device is not in use.
b) Use only non-corrosive agents for surface cleaning.
c) Store the device in a dry and cool place protected from moisture and
direct sunlight.
d) It is forbidden to spray the device with water jet or to immerse it in water.
e) Inspect the device regularly for operability and any damage.
f) Use a soft and damp cloth for cleaning.
g) Do not use sharp and/or metal objects for cleaning (e.g. wire brush or
metal spatula) as they may damage the surface of the material from
which the device is made.
Grid and blade cleaning:
1. Make sure the device is switched off and disconnected from the power supply.
2. Wear protective gloves.
3. Open the latches and lift up the top panel.
4. Remove the grid. There is a blade under the grid. Both the grid and the blade
should be cleaned with high-volume alcohol.
ATTENTION: Do not use chemicals for cleaning!