Tabla de contenido
Idiomas disponibles
Idiomas disponibles
d) In case of doubts whether the device is working properly, contact the
manufacturer's service department.
e) Repairs of the device can be done only by the manufacturer's service. Do not
carry out repairs yourself!
f)
In the event of fire, use only powder or snow extinguishers (CO2) to extinguish
the live equipment.
g) Keep children and unauthorised persons away from the workplace. (Inattention
may cause loss of control of the device).
h) Use the device in a well-ventilated area.
i)
The device generates dust and debris when in use, protect bystanders from
their harmful effects.
j)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
k) Keep these instructions for use for future reference. If the device is to be passed
on to third parties, the user manual must be handed over together with the
device.
l)
Keep packaging parts and small assembly parts out of the reach of children.
m) Keep the device out of the reach of children and animals.
2.3.
Personal safety
a) The machine must be operated by persons who are physically fit, capable
of operating it and who have been adequately trained and who have read
this manual and have received instruction in occupational safety and
health.
b) The machine is not intended to be used by persons (including children)
with reduced mental, sensory or intellectual functions or lacking in
experience and/or knowledge, except when they are supervised by a
person responsible for their safety or have been instructed by him on how
to operate the machine.
c)
Be careful and use common sense when working with the device. A
moment of inattention during operation can lead to serious injury.
d) Use the personal protective equipment required when working with the
device as specified in point 1 of the explanation of symbols.
e) The use of appropriate, approved personal protective equipment
reduces the risk of injury.
f)
To prevent accidental start-up, make sure the switch is in the off position
before connecting to the power source.
Tabla de contenido
