Important; Using The Ac Adaptor - Sangean DPR-99+ Manual De Instrucciones

3. Slide the battery switch to the Rechargeable position and then
replace the battery cover.
4. The charge indicator lights to show that the batteries are charging.
Batteries will be fully charged in around 7 hours.
● Important: when using rechargeable batteries the battery switch
must be placed in the rechargeable position. Batteries will only
be charged when the radio is switched off and connected to the
AC adaptor.
● Reduced power, distortion or your radio switching off by itself are all
signs that the batteries may need recharging.
● If the radio is not to be used for any extended period of time it is
recommended that the batteries are removed from the radio.
IMPORTANT: The batteries should not be exposed to excessive
heat such as sunshine, fire or the like. After use, disposable
batteries should if possible be taken to a suitable recycling centre.
On no account should batteries be disposed of by incineration.

Using the AC adaptor

The AC adaptor for use with the radio should provide 12 volts DC output
at 1 amp, centre pin positive.
1. Insert the adaptor plug into the DC in socket on the left hand side of
your radio.
2. Plug the adaptor into a standard 13A mains socket outlet. Whenever
the adaptor is plugged in to the radio and switched on at the mains
the batteries are automatically disconnected. If the adaptor is
plugged in to the radio but not switched on then the radio will run
from the batteries if fitted. The AC adaptor should be disconnected
from the mains supply and the radio when not in use.
● IMPORTANT: The mains adaptor is used as the means of
connecting the radio to the mains supply. The mains socket used
for the radio must remain accessible during normal use. In order to
disconnect the radio from the mains completely, the mains adaptor
should be removed from the mains socket outlet completely.
5