Honeywell Home R200ST-N1 Guía De Instalación Y Usuario página 7

Refer to page 4, picture ⑤.
Once the plastic pin is cut and the mounting plate is subsequently mounted, the function is enabled.
To disassemble the alarm, take a screwdriver and push it into the mounting hole ⑤. Then rotate the alarm
counterclockwise to remove the alarm from the mounting plate.
7. Practice fire safety
If the alarm sounds, and you have not pushed the test button, it may be warning of a dangerous situation and your
immediate response is necessary. If you are in any doubt regarding the cause of an alarm it should be assumed
that the alarm is due to an actual fire and the dwelling should be evacuated.
Expose everyone to the sound of a smoke alarm and explain what the sound means. Develop family escape plans,
discuss them with all household members, and practice them regularly. Determine the exits from each room and
an escape route to the outside from each exit. Teach all household members to touch the door and use an
alternate exit when the door is hot. Teach household members to crawl along the floor to stay below smoke and
dangerous gases. Establish a safe meeting place outside the building.
8. Recommended actions when smoke alarm warning has been activated
Raise the alarm by shouting: "Fire! Fire! Fire!", or by banging metal objects together. Evacuate immediately, using
the nearest fire exit. Do not stop to investigate the fire or to collect valuables or pets. Use your escape route to get
everyone out and meet at an agreed point. Along the way, close any open doors, and only open the doors you
need to go through. Check doors and handles with the back of your hand. If they feel warm, don't open the door. If
there is a lot of smoke, crawl along the floor as the air and visibility will be better.
Once you've got everyone out of the building, call the Fire Brigade from any phone. Give the operator your name
and address. Don't go back into the building for anything. If there is still someone inside, tell firefighters when they
arrive - they will be able to find the person quicker and more safely than you.
Find somewhere safe to wait for the Fire Brigade. When they arrive, try to give them as much information as
possible about the fire and building.
Note: These guidelines will assist you in the event of a fire, however, to reduce the chance that fires will start,
practice fire safety rules and prevent hazardous situations.
9. Visual & acoustic signals
Operating mode Visual signal(flash)
Normal 1 x per 48 seconds
Test 1 x per second (4 x)
Alarm of smoke 1 x per second (4 x)
Acoustic signal(beep) Description
None Device is functioning properly
1 x per second (3 x) / Device is testing by press the
pause of 1,5 seconds test/silence button for 2 seconds
1 x per second (3 x) / Device is detecting smoke
pause of 1,5 seconds
-7-