Tabla de contenido
Idiomas disponibles
Idiomas disponibles
For Low Water:
How to Set Delay Start Timer
1. Press
(on/off) button and then up or
down arrows to set cooking time.
1. Unit will beep, display will tell you
water is low, and LOW WATER
indicator light will come on.
2. Press DELAY button. Display will flash
00:30 as default delay time. Minimum set
time is 30 minutes and maximum delay
time is 24 hours.
3. Press up or down arrows to set delay time. After approximately 5 seconds, display will show
selected delay time and unit will begin to count down. After delay time expires, Steamer will
switch to cooking mode and steam for selected cook time. NOTE: Delay Start should only be
used with non-perishable foods. Do not use Delay Start for steaming meat, fish, poultry, or
eggs. Follow USDA food safety guidelines. Visit foodsafety.gov for more information.
2. To add water to Water Reservoir: Pull
out Water Inlet Drawer and gradually
fill Reservoir with water. Check Water
Reservoir Window to see water level.
NOTE: Raw meat should NEVER be cooked using
DELAY start timer. Visit foodsafety.gov for more
information on safe food handling.
• Cooking/steaming will begin once unit
has completed delay time countdown.
• Steamer will switch to WARM mode for
up to 1 hour after cooking ends.
• If water level in Steamer becomes
too low, it will switch OFF and flash
"– –." Fill unit with water to MAX line;
then push
(on/off) button to restart
Steamer. LOW WATER indicator light will
also illuminate.
7
Tabla de contenido
