Tabla de contenido
FINAL ASSEMBLY
1. Align door and reattach hinges to mounting plates until audible click is heard. Ensure all hinges are fully seated before attempting to
adjust door.
2A. For small or light doors, the slow close feature can be deactivated on one of the hinges.
2B. Door must be closed once for the deactivation to be complete. To reactivate, move switch back to original position.
1
NOTE: The door hinges have a three-way adjustment feature. These adjustments can be made using a #2 Phillips Head screwdriver.
Hinge will need to be partially extended to reach the height adjustment screw.
3A. Side adjustment – Rotate front screw to increase or decrease door overlay.
3B. Depth adjustment – Rotate rear spiral tech cam screw to adjust door gap.
3C. Height adjustment – Rotate cam screw on mounting plate to adjust door.
Hinge Extended
3A
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
2A
3B
7
2B
3C
Hinge Partially
Extended
Part no. CB-209-1439 5/10/22
Craft Series Cabinet
Tabla de contenido
