TotalPond 92564 Manual Del Usuario página 11

IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in and the pump
is getting power.
• Check the pump outlet and any tubing, fountains, spitters etc.
for kinks or obstructions.
• Remove the front cover and/or pump cover, and impeller cover
to expose the impeller. Turn the impeller to ensure that it is not
broken or jammed.
IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY OR
THE PUMP DOES NOT FLOW EVENLY:
• Check to make sure the pump is completely submerged in water
• Check to make sure the impeller and the impeller housing are
clean.
• Adjust flow control.
SPITTER TROUBLESHOOTING
• Check the pump outlet, diverter valve, tubing, and spitter outlet
and inlet for kinks or obstructions.
• Adjust flow control on diverter valve, make sure water is running
the to spitter.
• Refer to Pump Troubleshooting.
• The LED Lights may require cleaning from time to time for
optimal performance.
• Before cleaning, always disconnect from the power source.
• Use a soft cloth or brush and warm water to clean the parts.
• Reconnecting to the power source when you are finished.
• If lights fail to illuminate, check that lights are getting power by
testing another appliance in the same power outlet.
• The light is designed to turn on when it gets dark, and turn off
when it gets light. To activate the light during daylight hours,
cover the sensor.
• If lights do not turn off during daytime, check sensor. Make sure
the sensor faces up and is not covered by dirt or debris.
For product maintenance videos visit totalpond.com
Please call Customer Care before returning item to store: 1-888-412-6001
PUMP TROUBLESHOOTING
LIGHTS MAINTENANCE
LIGHTS TROUBLESHOOTING
9