Test Mode - koban KDP1 Manual De Instrucciones

KDP1 360 FP
Presence detector
Test mode (Uncontrolled
by Lux)
LED function & reaction
• The red LED of KDP1 360 FP is
behind the lens (See F G.21) for
test mode indication. In walk
test, LED will turn on for 2sec
once the detector is triggered.
If detector is continuously
triggered, the red LED will
require an interval time of 2sec
to turn on again. With the above
said LED function, the load is not
necessary to be connected while
conducting walk test.
• LED functions as an indicator
only in warming up period and
FIG.21
Walk test
Instructions manual |
LED
36
NOTE
to warm up after power is supplied
FIG.22
Test procedure
•
•
•
•
detection pattern until LED turns
• above steps
Usage of lens shield
360 FP
www.grupotemper.com