Inserting And Removing The Battery - Btwin E-LD500 Instrucciones De Uso

Never allow children to play with or handle the battery.
Do not immerse in water.
Do not use a high-pressure washer.
Rain resistant
V / Hz
= Always check that the charger and battery are compatible.
+200 V / +240 V
Always make sure the charger is compatible with the local electricity network:
=
Voltage: 100 V, maximum 240 V.
+50 Hz / +60 Hz
Frequency: minimum 50, maximum 60 Hz.
Preferably charge the battery indoors.
Plane transportation prohibited.
Any failure to comply with recommended safety precautions will result in a cancellation
of the warranty.
10

Inserting and removing the battery

Insertion:
CLIC
Removal:
Before inserting your battery into its housing, check there are
no foreign bodies or objects on the connectors. Insert the
battery until it clicks.
Before removing your battery, unlock it using the key.
Turn off the switch. Then, remove the battery by pulling on it.
11