Jolly Mec J20 Ficha De Montaje, Uso Y Mantenimiento página 78

Menu 05 - stand-by mode
Press the SET key. Using the key
05 and confi rm with the SET key. Using the key
choose whether to enable (ON) or disable (OFF) the choose whether to enable (ON) or disable (OFF) the
stand-by function. Press the ON/OFF key
If enabled, the device will go to stand-by once the set
temperature has been reached.
Menù 06 - buzzer mode
It allows you to enable or disable the acoustic buzzer
on the controller.
Menù 07 - start load
This function is only available in OFF and allows you to
load the screw feeder on fi rst start-up, when the pellet
tank is empty. Having selected Menu 7, the writing as tank is empty. Having selected Menu 7, the writing as
in Figure (A) will scroll on the display. Then press
(1). The smoke fan switches on at maximum speed, the
screw feeder switches on and remains on until the time
indicated on the display is up or until the key
pressed. (Figure B)
Menù 08 - stove status
Displays the work status.
28
(2), go to menu (2), go to menu
(1)
(4) to exit.
A
(2) is
off
Menu 05
mode
Stand‐By
OFF
Menu 06
mode
Buzzer
OFF
Menu 07
B
P1 to
load
OFF
Menu 08
state
stove
90
21° C 50 °C
load
initial