Jolly Mec J20 Ficha De Montaje, Uso Y Mantenimiento página 55

All the installation operations, connection to the smoke fl ue, hydraulic
connection, cleaning and maintenance by the end user and/or specialised
technician, should be carried out with the boiler off, completely cold and
disconnected from the electrical power supply.
Boiler lifting and movement
To facilitate lifting and movement of the boiler, the body of the product has a lifting ring.
• Remove the fi xing screws of the upper cover. (A)
• Gently remove the insulation paying attention not to damage it. Then, remove the fi xing wings and
the relevant plates. (B)
• There is a lifting ring near the smoke passage tubes. (C)
(A)
Pellet
The pellets are cylinders of compressed wood, produced from sawdust and wood processing (chips
and sawdust), generally produced by sawmills and carpenters. The binding capacity of the lignin
contained in wood, allows to obtain a compact product without adding additives and foreign contained in wood, allows to obtain a compact product without adding additives and foreign
chemicals to the wood, is therefore obtained a natural fuel with high yield.
The use of expired pellets or any other unsuitable material can damage parts of the
thermostove and impair proper operation: this can lead to the termination
of the guarantee, and its producer responsibility. With obvious fl oor
capacity evaluation, in the installation premises, a maximum can be
deposited of fuel, which corresponds to approx. 975kg of pellets.
For our products use pellets diameter 6 mm, length 30 mm and a maximum of 8% and EN Plus
A1 preferably SK002 certifi ed according to the UNI EN ISO 17225-2 standard. Keep the pellets
away from heat sources and not in humid environments or with explosive atmosphere.
(B) (C)
5