Infiniton WFL-284 Manual De Instrucciones página 78

View temperature by selected area
L1: Temperature display
Top zone: 5- 12 ˚C
Middle zone：8-12 ˚C
Bottom zone: 12-20 ˚C
Increase temperature
K4: Press the button once, the LED display will flash indicating the current temperature. Press
again to set the temperature. 1 touch will increase the temperature by 1 degree. The blink
stops after 5 seconds without action on your part, and the new temperature requested is
recorded. The LED display then shows the actual temperature inside.
Decrease temperature
K5: Press the button once, the LED display will flash indicating the current temperature. Press
again to set the temperature. 1 touch will reduce the temperature by 1 degree. The blink
stops after 5 seconds without action on your part, and the newly set temperature is recorded.
The LED display then shows the actual inside temperature.
Settings
Fahrenheit/Celsius
K6: Switch the temperature display between Fahrenheit/Celsius by pressing the button.
There are two internal fans for airflow however fluctuations of up to 3 degrees is expected.
The average temperature throughout the wine cellar will be a maximum of 1.5˚C of the
requested temperature (once sufficient time for cooling has passed). Once a temperature
difference of 3˚C above the set temperature is detected, the cooling cycle will start to bring
23