Southwire MAXIS Xtreme MXB2000 Instrucciones De Operación página 7

SETUP AND OPERATION:
4. The IMC and EMT roller supports have a trap plate that may require
adjustment to properly fit under the leg of the bender. Verify that the trap
two set screws, adjust the leveling bolts so the trap plate fits under the
leg of the bender, then retighten the set screws.
LEVELING SCREW
3.1"(78mm)
Installing the Hinge Pin
11
SETUP AND OPERATION:
6. Install the cotter pin into the end of the roller support hinge pin to secure it.
TRAP PLATE
Installing the Cotter Pin
before attempting to install the bending shoe.
0
LOADING PEDAL
12
ROLLERS
RETRACTED