Deflating And Packing - FitNord AQUA 300 Manual Del Usuario

5 DEFLATING AND PACKING

After use let the board dry, also wipe off dirt and debris to keep the board clean.
Remove the fin and the safety leash and open the valve by pushing it down firmly.
NOTE!
There will be a loud burst of air initially.
When the board has deflated enough on itself,
connect the pump hose on the other side of the
pump (deflate mode) and pump the remaining
air out. Start folding the board from the back
end, watch out for the fin box. When completely
folded, tighten the strap around the board to
prevent it from spreading open.
NOTE!
Do not leave the wet board on the roll for a long
time. Information on storing the sup board can be
found by the following section
EN EN
13