Fein RS17-70E Manual De Instrucciones página 16

en
16
Character Unit of measurement,
international
P
W
1
P
W
2
v
m/s
0
U V
f
Hz
M...
mm
Ø mm
l
mm
1
l
mm
2
mm
kg
L
dB
pA
L
dB
wA
L
dB
pCpeak
K...
2
m/s
2
m/s
h
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
For your safety.
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have
thoroughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 465 06 0). The documents mentioned should
be kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial
safety regulations.
Intended Use:
Hand-guided pipe sander for:
– Dry belt grinding of metal pipe surfaces
– Polishing of metal pipe surfaces
in weather-protected environments with the applica-
tion tools and accessories recommended by FEIN.
Use only with firm footing.
The power tool is intended for operation by skilled
personnel at non-permanent everyday use.
Unit of measurement,
national
W
W
m/s
V
Hz
mm
mm
mm
mm
mm
kg
dB
dB
dB
2
m/s
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Explanation
Power input
Output
Sanding-belt speed
Rated voltage
Frequency
Size of metric thread
Diameter of a round part
Sanding-belt length
Sanding-belt width
Maximum pipe diameter
Weight according to EPTA-Procedure 01
Sound pressure level
Sound power level
Peak sound pressure level
Uncertainty
Vibrational emission value according to
EN 62841 (vector sum of three directions)
Vibrational emission value (sanding)
Basic and derived units of measurement from
the international system of units SI.
2
This power tool is also suitable for use with AC gener-
ators with sufficient power output that correspond to
the Standard ISO 8528, design type G2. This Standard
is particularly not complied with when the so-called dis-
tortion factor exceeds 10 %. When in doubt, please
refer to the generator instruction/specification guide.
All other types of use are considered as not intended
for.
The operator is solely liable for any damage caused by
use not as intended for.
Foreseeable improper use
For safe operation of the power tool and to exclude
misuse, the following is prohibited:
– Unauthorized modifications
– Improper use, particularly (but not exclusively) for
the processing of wood, mineral materials, magne-
sium, plastics, fiber-reinforced composites.
– Non-observance of the operating instructions
Special safety instructions.
Hold the power tool by the insulated gripping surfaces,
as the grinding surface can run into the machine's own
power cord. Damaging a "live" wire can make exposed
metal parts of the power tool "live" and shock the
operator.
While working, do not wear loose clothing, jewellery or
open, long hair. Despite protective devices, loose
objects can be snagged or caught by moving parts and
lead to injury.