EN
screen.
Pressing the NIGHT-LIGHT Button will switch oft the night-light. Press again to
switch on.
Pressing the SETUP Button twice to set the timer (when the LED display starts to
blink the word
„Timer")The timer function determines how many hours the humidifi er will
operate. You can set the
timer simply by pressing +I- once for each hour that you would like to run the unit.
Many people set the timer for 8-9 hows (during their sleep) but it can be set from
1 hour to 12 hours. When the timer is set, the length of time is displayed in the
middle of the LED display (#17). As time passes, the time value decreases until it
goes to 00:00 and the machine shuts off.
Once you have set the automatic humidity and the timer, the value of time
remaining in timer. the desired relative humidity and the actual relative humidity
will displayed 40 seconds alternating in the middle of LED display(#18)
If the humidifier should run out of water, you will hear a beeping sound before the
machine will automatically shut off. The LED screen will display the Empty Water
Tank icon (#16).
The bright LED display is designed to automatically dim alter 30 seconds of
pressing any of the LED panel buttons. The power light is also dimmed because
the water tank is tinted. The result is a soft blue glow. The light levels are bright
enough to indicate that the machine is operating. yet low enough to ensure a
restful sleep in near darkness.
The SP8-807 is equipped with a Permanent Reusable White Dust & Anti-Microbial
Filter. It consists of an inner cylinder. an outer cover and a number of small
plastic and ceramic balls. The plastic balls are embedded with nano-silver, an
anti-microbial agent designed to purify the water and destroy microbes such as
bacteria and mould. The ceramic balls function to soften the water by adhering to
minerals that cause white dust. They also serve to remove any unpleasant odour
from the water. The fi lter requires cleaning about once a month or 1.000 hours of
use. See the maintenance section of more information.
26