Klarstein ROYAL FLUSH DOWNDRAFT Manual De Instrucciones página 27

1. The cooker hood should be at least 15 mm away from the wall (see picture 1).
2. Apply some glass glue to the bottom edge of the control panel (see picture 3)
and sink the hood into the pre-drilled hole (dimensions see picture 2). Fasten
the exhaust hood with four ST4*8 screws and ST4*14 screws (see picture 4).
3. Attach the air outlet to the housing with 4 ST4*8 screws (see picture 5).
4. Fasten the housing to the hood with 8 M10*10 screws. The outlet can face up,
down, left or right, depending on how much space you have (see picture 6).
5. Attach the exhaust pipe to the outlet and fix the PCB box to the cabinet
bottom with four ST4*14 screws. Connect the power cable last (see picture 7).
To change the bulb
Open the door of the exhaust hood. Insert a screwdriver with a straight slot into
the bulb cover and lift it up. Turn off the hood and unplug it from the wall outlet
before replacing the bulbs.
EN
27