KALLISTA P29513-00-NA Instrucciones De Instalación página 5

2. Installation for 3-Way
IMPORTANT! Do not remove the internal plug from the valve body. The plug
connects the left and right ports, allowing either to be used for an additional
accessory.
Install 1/2" copper tubing or piping for all accessories. Securely fasten the piping
and outlet elbows to the framing.
Install temporary 1/2" nipples in the outlet elbows so that they extend a minimum
of 2" (51 mm) beyond the finished wall.
Turn ON the water supply to the valve.
Check for leaks and proper operation.
Turn OFF the water.
Install caps on the temporary bath and shower nipples.
Turn ON the water supply and check for leaks.
Turn OFF the water.
Complete the finished wall.
Remove and discard the plaster guard.
Install the trim according to the instructions provided with the trim.
Kallista
Accessory Water Lines
1/2" Copper Tubing or Piping
Mixed Water Supply
3/4" Copper Tubing or Piping
5
1491214-2-A