Prepare The Site - KALLISTA P29513-00-NA Instrucciones De Instalación

1. Prepare the Site

2-9/16"
(65 mm)
3-3/4" (95 mm)
Provide a 2-7/8" (73 mm) to 3-1/8" (79 mm) diameter hole in the rough wall
material for the plaster guard.
Route a 3/4" mixed water supply line to the transfer valve location.
Apply sealant tape to the inlet port threads.
Connect the water supply to the transfer valve inlet.
2-way: If two accessories will be attached to the valve, proceed to the "Installation
for 2-Way" section.
3-way: If three accessories will be attached to the valve, proceed to the
"Installation for 3-Way" section.
1491214-2-A
Plaster Guard
Max
Finished
Wall
Mixed Water
Min
Supply 3/4" Copper
Finished
Tubing or Piping
Wall
4
Inlet
Kallista