Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Cat. No. / No de cat.
0820-20
M12™ MOUNTING FAN
VENTILATEUR MONTABLE M12™
VENTILADOR MONTABLE M12™
WARNING
WARNING
AVERTISSEMENT
AVERTISSEMENT
comprendre le manuel.
comprendre le manuel.
ADVERTENCIA
ADVERTENCIA
To reduce the risk of injury, user must read and understand operator's manual.
To reduce the risk of injury, user must read and understand operator's manual.
Afin de réduire le risque de blessures, l'utilisateur doit lire et bien
Afin de réduire le risque de blessures, l'utilisateur doit lire et bien
Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
Tabla de contenido
loading

Resumen de contenidos para Milwaukee M12 0820-20

  • Página 1 OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. / No de cat. 0820-20 M12™ MOUNTING FAN VENTILATEUR MONTABLE M12™ VENTILADOR MONTABLE M12™ WARNING WARNING To reduce the risk of injury, user must read and understand operator's manual. To reduce the risk of injury, user must read and understand operator's manual. AVERTISSEMENT AVERTISSEMENT Afin de réduire le risque de blessures, l'utilisateur doit lire et bien...
  • Página 2 Slippery handles and • Use personal protective equipment. Always your capability; contact Milwaukee Tool or a trained wear eye protection. Protective equipment such grasping surfaces do not allow for safe handling and professional for additional information or training.
  • Página 3 Return the tool, battery pack, and charger to the following two conditions: 1) This device may recommended for this tool. Others to a MILWAUKEE service facility for repair. After six not cause harmful interference, and 2) This device may be hazardous.
  • Página 4: Sécurité Du Lieu De Travail

    Un moment cas de dommages, faire réparer l’outil avant de is determined by MILWAUKEE to be defective in material or workman- outil électrique. Ne pas suivre l’ensemble des règles d’inattention pendant l’utilisation d’un outil électrique l’utiliser.
  • Página 5 ; Mise en marche et à l'arrêt veuillez contacter Milwaukee Tool ou un professionnel Pour démarrer le ventilateur, tourner le commutateur formé pour recevoir plus d’information ou formation.
  • Página 6: Seguridad Eléctrica

    FCC et les normes RSS d’exemption L’enregistrement de la garantie n’est pas nécessaire pour bénéficier MILWAUKEE accrédité pour obtenir le service. Après de la garantie en vigueur sur un outil électrique MILWAUKEE. La date de licence de l’ISED-Canada. Son fonctionnement DE TRABAJO de fabrication du produit servira à...
  • Página 7: Mantenimiento

    Milwaukee Tool o con • No permita que la familiaridad por el uso frecuente • Cuando la batería no esté en uso, manténgala un profesional capacitado para recibir capacitación...
  • Página 8: Especificaciones

    Cómo ajustar el ángulo del ventilador Como se inserta/quita la batería en la Techtronic Industries Mexico, S.A. de C.V. y la batería, a un centro de servicio MILWAUKEE. herramienta Para ajustar el ángulo del ventilador, sujételo del Av. Presidente Masarik 29 Piso 7...
  • Página 9: Póliza De Garantía - Valida Solo Para México, América Central Y El Caribe

    Al devolver la herramienta eléctrica a un SOLO PARA MÉXICO, AMÉRICA Centro de Servicio de la fábrica de MILWAUKEE o a una Estación CENTRAL Y EL CARIBE de Servicio Autorizada de MILWAUKEE, se requiere que el flete esté...

Tabla de contenido