General Power Tool Safety Warnings - Parkside Performance PSSAP 2028 A1 Traducción Del Manual De Instrucciones Original

Battery PAP 20 B3*
Type
Rated voltage
Capacity
Cells
High-speed battery charger PLG 20 C3*
INPUT
Rated voltage
Rated power consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the tool is typically
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Total vibration value
Cutting board
Uncertainty
Cutting wooden beam
Uncertainty
PSSAP 2028 A1
LITHIUM ION
20 V (DC)
4.0 Ah
10
230–240 V ∼, 50 Hz
(AC)
120 W
T3.15A
3.15 A
21.5 V (DC)
4.5 A
approx. 60 min
II / (double
insulation)
L = 86.8 dB(A)
PA
K = 5 dB
L = 97.8 dB(A)
WA
K = 5 dB
a = 15.802 m/s 2
h,B
K = 1.5 m/s 2
a = 17.554 m/s 2
h,WB
K = 1.5 m/s 2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
General power tool
safety warnings
WARNING!
►
Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
GB │ IE
│ 3 ■