General Power Tool Safety Warnings; Work Area Safety - Parkside PDRW 1800 B1 Traducción Del Manual De Instrucciones Original

Noise and vibration data
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the power
tool is typically:
Noise emission value
Sound pressure level:
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Total vibration value
Main handle
Front handle:
Uncertainty
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparing one power tool with another.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the power
tool is being used, and in particular the kind
of workpiece being worked, the vibration and
noise emission values can deviate from the
values given in these instructions during
actual use of the power tool.
► It is necessary to establish safety measures to
protect the operator based on an estimation
of the vibration load during actual use (all
states of operation must be included, e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
PDRW 1800 B1
L = 99 dB (A)
PA
K = 3 dB
PA
L = 110 dB (A)
WA
K = 3 dB
WA
a < 2.5 m/s 2
h
a < 2.5 m/s 2
h
K = 1.5 m/s 2
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions, illus-
trations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive at-
mospheres, such as in the presence of flamma-
ble liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
GB │ IE │ 3 ■