The Control Panel; Changing A Programme - Onwa LV 455 Manual De Instrucciones

7. THE CONTROL PANEL

By pressing On/Off button(4), energise
the machine. On/Off lamp lights as long
as the machine is on. Select the suitable
programme by pressing Program button(5).
Press Start/Pause button (3) to start the
program. Start/ Pause lamp becomes off
and Wash lamp turns on.If you open the
door of your machine while program is
continuing, Start/Pause lamp will blink and
related washing step lamp is on.
Program flow can be monitored via
Wash,Rinse Dry and End lamps (7) on
control panel. Machine remains silent for
about 40-50 minutes when the drying lamp
is on.
NOTE: Pressing Delay and Half load
button(2) for 3 seconds activates half load
option which shortens the durations of the
programmes that you have selected and
reduce the energy and water consumption.
If you have used an extra feature(delay
or half load) (2) on the latest washing
program, this feature will remain active also
on the next washing program. If you want
to cancel this feature on the newly selected
washing program, press Delay and Half
load button (2) until related lamps are off or
turn the machine off with On/Off button (4).
If you would like to use extra feature with
newly selected program, select the desired
functions.
NOTE: You can delay start time of the
program for 3-6-9 hours by pressing delay
button (2) before program starts. If you
want to change delay time,first press Start/
Pause button and then Delay button to
select new delay time. To activate new
delay time, press Start/Pause button. To
cancel the delay, you need to press Delay
button until all
delay lamps are off.
NOTE: If user switches the machine to off
position after selecting the delay time and
the programme has started, delayed time is
cancelled.
NOTE: When softening salt is not enough,
salt lack warning indicator (6) turns on and
you need to fill in the salt chamber.
NOTE: When rinse aid is not enough, rinse
aid lack warning indicator (6) turns on and
you need to fill in rinse aid chamber.

Changing a programme

If you would like to change the program
while washing is continuing.
Press the Start/Pause button.
After the program stops, select
your desired program via the
Program selection button.
EN - 17