Storage; Cleaning And Maintenance; Replace Accessory - Create Steam Cleaner PRO 9 Manual Del Usuario

• If you find the red circle inside the safety cap broken, replace it with a new one (there are
two included).
• Take the safety cap from the main body, replace the red circle. Install the replacement part
in the safety cap.
ATTENTION: In order to prevent steam leakage from the product, please check if the red
circle is installed correctly.
ATTENTION: Please turn off the power button before unplugging the plug.
• Put the product in the storage box after cooling. No washing powder or any other chemical
detergent can be used inside the product's boiler.
• Main body: Put a neutral rinse solution on a soft cloth. Put a little water on the cloth and gen-
tly wipe the body of the product. Then wipe the water on the body surface with a dry cloth.
• Product boiler interior: If you want to remove sediment from the boiler, pour clean water
into the boiler, tighten the safety cap and gently shake the product. Then open the safety
cap and pour out the water together with the sediment.
• Accessories: Clean the parts with a damp cloth and then dry them. If you find any stain on
the parts, please clean it with water. Do not wash them in the washing machine.
• Hub: If the steam port is clogged with dirt, use an extraction needle to clean it.
• Power Cord Plug: Use a dry cloth to clean the plug regularly.
STOR AG E
• Remove the accessories, clean the dirt on the surface of the product, and store it in a dry bag.
• Avoid placing products in places that vibrate frequently or where hot and cold alternate
frequently.
• Avoid places where the products are in direct sunlight or in hot, humid and exposed places.
• Products should be placed in places where children cannot reach them.

REPLACE ACCESSORY

CLEANING AND MAINTENANCE

E NGLI SH
13