Installation Of Ironing Brush And Window Cleaner; Add Water - Create Steam Cleaner PRO 9 Manual Del Usuario

INSTALL ATI ON OF I RONI NG B RU SH AN D WI ND OW C L EA NE R
Point the ironing brush A towards the window cleaner A and lock it. Then lock the glass
cleaner B to the ironing brush, you will hear a click. Point the white dot on the ironing brush
to the unlock position and turn the ironing brush clockwise until the white dot points to the
lock position. Make sure it is installed correctly.
ATTENTION: Before adding water, please confirm that the power is off and unplug the power
cord, cooling it for more than 5 minutes. Please confirm the specifications of the area of use
and the length of the power cord.
• Rotate the safety cover to the left, until it is open.
• Add water: Use the measuring cup and funnel. The maximum capacity is 250 ml. If the
water is more than 250 ml, there will be steam along with water droplets from the product
during use. If there is not enough water, the pressure will be low, resulting in less steam
flow.
• The water capacity of the product is 250 ml. Please don't add too much water. Do not add
any other liquid except water. Do not use this product without water inside.
• Add water according to the indicator scale on the measuring cup.
• Turn the safety cap clockwise until it is tight.
• Confirm that the knob is tight. During use, do not twist the safety cap. Confirm that the
safety cap is installed correctly. If it is not closed properly, it will break the safety cap.
• Power light indicator: Plug in the machine, press the power button, the indicator light turns
red. Please confirm the household power consumption, do not use together with other high
power appliance. When the power light turns green, you are ready to use steam. It takes
3-5 minutes to change the red light to green.
B
A
A
B
A

ADD WATER

A
E NGLI SH
11