Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The food not cold enough
The appliance cools too
much
Some noises may be heard during normal appliance operation (compressor operating
cycle, automatic defrosting, circulation of the refrigerating gas through the appliance,
etc.).
If you cannot find the cause of the fault,
professional.
The appliance is touching
the wall or other objects
A component, e.g. a hose,
at the back of the
appliance is touching
another part of the
appliance or the wall
The temperature is not
properly set
The door was left open for
an extended period
A large quantity of warm
food was placed in the
appliance within the last
24 hours
The appliance is near a
heat source
The thermostat is too high
only call our approved after-sales service or a qualified
Move the appliance slightly
If necessary, carefully bend
the component out of the way
Please refer to the
temperature control section
Only open the door when
necessary
Turn the thermostat to a
higher setting temporarily to
cool down the appliance.
Please refer to the installation
location section
Turn the thermostat to a lower
setting temporarily
Tabla de contenido
