Starting Projector; Imageadjustment; Focus Adjustment - YABER Pro V8 Manual De Instrucciones

Tabla de contenido

Idiomas disponibles

STARTING PROJECTOR

1)Press the power button on the remote control until the red light goes off;

2)Adjust the focus ring on the left side of the projector to get the best image

performance; (If it is still blurry, please try to adjust the projection distance.)

3)Use the vertical/horizontal Trapezoid of the projector to get a rectangle projec-

tion screen;

4)Connect the external device (Smart phone, iPad, Fire TV, TV box, DVD player,

Computer, etc.) in the corresponding interfaces of the projector, please be sure to

select the corresponding source. If you do not select the correct source, the

projector will not be able to detect the signal.

5)Select the [Setting] icon，enter the [General setting] menu, and then you can

select the option [Language setting]to set the preferred language of your main

system.

IMAGE ADJUSTMENT

When using the projector for the first time, it normally displays an unclear

image. This is due to the lens being out of focus or the incorrect trapezoid

setting.

Please follow the below steps to correct:

Focus Ring

Tabla de Contenido

Tabla de contenido