Lenco Xemio-768 Guía Rápida página 5

NOTE about the hearing protection function; a display warning pops -up
on the screen, or a beep warning can be heard from the earphone every
time you increase the volume and reach to the default setting level 12
which may exceed 85dB limit. Press the M button to accept the warning
and continue increasing the volume by pressing +.
Bluetooth Audio Transmission
To Turn On the Bluetooth Function:
• From the main menu, choose the Bluetooth function by using
and buttons, a Bluetooth sub menu appears.
Search and Pair Bluetooth device.
NOTE: Before pairing, please make sure your Bluetooth Receiver Device
supports the Bluetooth A2DP profile.
• Keep the device within a 1 meter range of your Bluetooth receiver
device. Power it On and set it into searching / pairing mode;
• Turn the BT On in "BT Control" menu.
• Then, in the Bluetooth list menu choose "Search Device" by using the
and
/
approximately 10 ~ 20 seconds. Devices found will be listed on the
screen.
• Choose your device from the on screen list and choose "Pair /
connect" by using the
both devices should be paired and a Bluetooth icon "
the display indicating the Bluetooth connection is ok. If the connection
is lost the color of the Bluetooth symbol will change to grey.
• Choose "Folders & songs" in the Music menu list to directly select your
favorite music.
• "The player will switch to the "Now Playing" screen. You now can
select Previous / Next / Play / Pause and adjust volume by using the
/ ,
• To exit the Bluetooth Transmission function, press the
until you see the main menu icons. Select the Bluetooth menu. Select
'BT control' from the list and select 'Turn BT off' .
buttons, the device will start searching
/
and / buttons.
and button. Wait a few seconds,
5
/
for
" will show on
button