Ebinger E-RAIN 32-100 Manual De Instrucciones página 18

DE EN FR ES IT
2
Connect the motor and make sure that it is in the operating position.
The locking bolt is now inserted in position 2 (fig 6).
Now adjust the sprinkler water jet (fig. 12) and its intensity:
fig. 6
The circular movement of the sprinkler can be adjusted as required
using both setting screws (fig 13).
The spray jet can be "interrupted" using an additional setting screw
(fig. 14).
fig. 14
fig. 13
fig. 12
Now connect the supply hose (fig 15). When doing this, ensure that
there is no pressure and that the water supply has been interrupted.
The hose must be locked appropriately using the clips provided there
(fig 16). The strap is placed over the hose (fig 17).
fig. 16 fig. 17
fig. 15
18