Description Of The Model; Package Content; Included Items - Carson DAZZLER RTR Manual De Instrucciones

2WD Buggy DAZZLER

Description of the model

Starting your nitro powered model is made simple by pressing a button on the transmitter.
This button activates the electric on-board starter and the preheating of the glow plug
Reverse gear
A slide switch on the transmitter activates an electric motor on the chassis, so that reversing is possible.
RC system
The RC system is already mounted. Throttle/brake servo and linkage as well as steering servo and steering linkage are
already installed and properly adjusted.
The Fail Safe System in the receiver stops the car, when there is no signal from the transmitter.
Drive
The powerful 3 ccm Toki engine with 1,8 kW (2,5 hp) at 29000 rpm start functions from transmitter via an electric on-board
starter. The rotary valve carburettor is already prepared ready for running at the factory. No further adjustment or break-in is
necessary before starting the engine. Adjustment may change according to the fuel and plug to be used.
The driving power of the engine is transmitted to the differntial gear of the rear axle.
The built-in tank holds 75 ccm.
Chassis frame
The superb chassis frame and the differential gear in the rear axle provide the model with perfect handling.
If you wish to adjust the handling, you can change the camber in both axles as well as the alignment of the front wheels.
The damping is affected by resetting the oil filled shock absorbers in other linkage points and by selecting a higher or lower
spring preload.
Dish-wheels with grooved tyres in the front and multi spiked tyres in the back provide perfect lateral guidance and optimal
traction
Chassis
The cradle chassis with RC installation plate made of impact tough plastic offers protection to the components against
stone impact. Additionally the receiver is placed inside an RC-Box.
The body is cut, painted and with decals.

Included items

small parts such as antenna pipe, hook pins, box wrench
No. 103003
09/06
All manuals and user guides at all-guides.com
Cradle chassis with RC installation plate,
3-ccm Toki nitro powered engine
Barrel carburettor and tuning pipe, glow plug
On-board starter and reverse gear
Four dish-wheels
with grooved tyres on the front axle
and multi spiked tyres on the rear
27MHz 4-Channel Pistol grip transmitter
steering servo and throttle/brake servo already mounted
Charger
for NiMH 7,2V / 1300 mA/h battery
for on-board starter system and electrical reverse gear
instruction manual
Body, cut and painted
23