Control Panel - ADURO P5 Serie Manual De Usuario

When the stove is running by room temperature, it will use the temperature probe placed on the lower back
part of the stove. The remote also contains a temperature probe that can be used instead. The probe is
activated via the remote by choosing OK -> USER SETTINGS -> CHOOSE PROBE -> ON BOARD (on
stove) / REMOTE (on remote).

5.3 Control panel

The control panel is able to use the basic functions of the stove.
BUTTON 1: ON/OFF Keeping this button pressed, the stove will switch on/off.
BUTTON 2: Press this button to increase/decrease the heat level.
5.4 Pairing the stove with the remote control
The remote is already paired with the stove upon delivery. If the remote does
not automatically connect to the stove, please use the following guide:
•
Make sure your stove is plugged in.
•
On the remote control, press the buttons "OK" and "ON/OFF" until the radio
id menu appears.
•
At this point press the button "–". The word "NEW" appears on the screen.
•
Press the button "OK" and select the desired channel number (+ and –
buttons).
•
Press the buttons 1 and 2 on the emergency control panel until all the LEDs
begin to flash.
•
At this point press the button "OK" on remote control to confirm the pairing.
Set room temperature, menu shift
Heat level setting, menu shift
Back, Exit
Confirm, menu
ON/OFF, exit
48