Installation; Mounting; Opening The Housing; Mounting Together With Other Units - jotron WP 900 Manual Del Usuario

Installation Guide
T942C- and T942C/2 Central Unit
J04
J13
Jumpers
S16
LEDs
LED01
IC-circuits
IC01
IC08
IC13
IC22
IC54
2.3

Installation

2.3.1

Mounting

Refer to T942C, see 1.3.1 Mounting on page 6.
2.3.2

Opening the Housing

Refer to T942C, see 1.3.2 Opening the Housing on page 6.
2.3.3

Mounting together with Other Units

Refer to T942C, see 1.3.3 Mounting together with other Units on page 8.
2.3.4

Wiring Runs

Refer to T942C, see 1.3.4 Wiring Runs on page 8.
2.3.5

Connection of Buses

Buses are connected either via modular bus cabling or twisted-pairs.
Note: Data buses are polarized! Use only twisted-pairs for separate wiring!
2003-01-08 / Rev.C
For connection of A or D-bus via twisted-pair wiring when modular
bus cabling cannot be used.
Used for diagnostic testing.
Not used.
(Two LEDs combined in one); LED01A Green function indicator and
LED01B Red function indicator.
Microprocessor, type 80C188EB.
Module key.
FLASH PROM contains the software for the main processor.
RAM memory.
FLASH PROM, contains the software for the communication
processor.
Handook page
25/128
TD 91684GB
23