Water Connection - Berner BHPC 150-2 4-in-1 Lance Manual De Instrucciones

•
sponding standards outside IEC.
• Due to the high power consumption of the machine an
appropriate mains fuse is required.
• Inadequate extension cables can be dangerous. If an
ground.
• BERNER recommends use of an extension cable
drum when cable extension is needed which keeps
the socket at least 60 mm above the ground.
•
by an authorized BERNER distributor or similar quali-
• Connecting the high pressure washer to a supply
(Zmax). Consult with the supply authority that the
equipment is connected only to a supply of that im-
pedance or less.

Water connection

• This high pressure washer is only allowed to be con-
according to EN 60335-2-79.
•
106411177.
•
• Operation by suction (e.g. a rainwater vessel) is car-
ting to a pressureless water supply". The machine
can be connected to water mains with a max. inlet-
Original Instructions
-
-
-
Connec-
7