Kohler K-6350 Guia De Instalacion página 6

Supply Tube
Coupling Nut
4. Connect the Supplies
CAUTION: Risk of restricted water flow and product damage. Use
extreme care when bending the supply tubes to avoid kinking.
CAUTION: Risk of back siphonage. Do not remove the ground
joints from this faucet. The ground joints contain important
back-siphonage protection.
- Install the sink following the sink manufacturer's instructions.
- Connect the supply tubes to the supply stops. Left is hot - right is
cold. Tighten all connections.
5. Installation Checkout
- Ensure that all coupling nuts are tight.
- Ensure that the lever handle is in the down position.
- Open the drain.
- Remove the spray head and screen from the end of the hose. Position
the hose in the sink.
- Turn on the main water supply, and open the valve for one minute to
flush the fitting.
- Reattach the spray head and screen. Turn on the water and check for
leaks. Repair as needed.
A
1025490-2-
Supply Stop
6
Kohler Co.