SNOWJOE SUNJOE SDJ617E Manual Del Operador página 7

Thread
forming
screws
Feet
4. Turn the motor housing upside down and lay it on the
ground. Insert the two pieces of the upper frame into the
sockets on either side of the motor housing, and secure
each one with a thread forming screw (Fig. 4).
Fig. 4
Thread
forming
screw
5. Place the lower frame onto the upper frame. Align the
holes on the tube sections and secure each side with the
included bolt and frame knob (Fig. 5).
Fig. 3 Fig. 5
6. Turn the mulcher + shredder right side up and fit the
Fig. 6
Upper frame
Thread
forming
screw
Motor
housing
7. Secure the funnel with the two latches on either side of
Fig. 7
7
Frame
knob
funnel onto the motor housing. Be sure to align the small
tab on the motor housing with the notch in the funnel
(Fig. 6).
the motor housing (Fig. 7).
Lower
frame
Upper
Bolt
frame
Notch
Tab
Funnel
Motor
housing