First Fix Basic Wiring - QAcoustics E120 Guia De Instalacion

First fix basic wiring

A basic E120 system with auxiliary optical digital input will have the first fix cable requirement as shown
below.
Cut holes for required back boxes and speakers. Run speaker and power cables as shown, leaving the
length of tails accessible for second fix. Optional line input cable can be run at this point.
Notes:
1. Switched mains socket required next to the DC extension cable for the power supply to plug in.
2. Single gang back box can be used for the optical AUX input cable. The can be terminated using
an optical termination plate such as the Nexxia Digital Optical Module Insert.
3. The supplied antenna cable can be attached to a normal quality coax cable which then connects
to an external antenna. If an external antenna can not be fitted then place the supplied internal
antenna as recommended in the Antenna alignment section.
DAB / FM antenna
3
Tails approx.
100mm
Mains
socket
Speker cables terminated using IMO plugs
Supplied with touch panel
Key:
Power cable
Speaker cable (left)
Speaker cable (right)
Optical mini TOSLINK (not supplied)
Antenna cable
1 2
8
ENGLISH
TV
EN