KTM 22112929544 Instrucciones De Montaje página 38

6 CHANGING THE LOCKING CYLINDER
16
–
Key in vertical position
–
Push engaging plate
–
Remove the locking cylinder.
Guideline
The key must remain in the locking cylinder.
500552-01
Installing the locking cylinder
–
Mount O-ring
Long-life grease (
–
Position and insert the locking cylinder as shown in the
figure.
The holding lug of the locking cylinder adapter is
facing downward.
Engaging plate
502806-01
–
Mount plug
The holding lug of the plug is seated in front of the
first gear teeth (see arrow).
500553-01
–
Move the key 90° to the right
–
Mount the cover with the springs.
Guideline
The springs must be seated correctly on the correspon-
ding holding lugs.
–
Mount and tighten screws
–
Position rocker arm
–
Mount and tighten pin
500554-01
–
Key in vertical position
–
Mount the securing unit.
Guideline
The spring must be seated on the corresponding recess
(see arrow).
500435-01
G
.
bq
into the locking cylinder.
bm
(included).
p. 18)
bq
engages.
dl
.
H
.
dk
.
ct
with the spring facing upward.
cs
.
G
.