Space Required; Levelling The Appliance - Brandt BFC6510SW Manual De Instrucciones

Space required

• Choose a location that is not directly to sunlight.
• Choose a location with enough space so that the refrigerator can open easily.
• Allow for a safety distance on the right-hand side (F), left-hand side (F), back (E) and
above the appliance when installing it. This allows optimising product performance,
reduces your power consumption and therefore limits your electricity bill (see diagram
below).
• Make sure that air can freely circulate behind the appliance.
Note that this appliance is not designed for built-in installation.

Levelling the appliance

Choose a place to install the refrigerator on a flat surface.
Procedure for adjusting the feet at the front of the product
If the appliance is not level, the doors will not be correctly aligned and
compartment sealing will not be ensured.
To level the appliance laterally, adjust the two adjustable feet on the front of
the product.
Once the appliance is installed, ensure that it is slightly inclined rearwards. In
this way, it will be easier to close the door. If necessary, adjust the setting of
the adjustable feet.
W 540mm
D 550mm
H 1593mm
A 910mm
B 1055mm
C(°) 130 ±5
E 50mm
F 100mm
Raise
Lower