Q-Connect Q20 JAM FREE Manual De Instrucciones página 2

USER MAnUAl FoR tHE Q20 JAM FREE
Q-ConnECtSHREDDER
IMPoRtAnt!
READ All InStRUCtIonS BEFoRE USInG
WARnInG
Do not insert fingers into the shredder and avoid
touching the feed opening with your hands.
Do not let children use or play near the shredder, keep
unplugged when not in use.
Do not insert any object into the shredder opening
other than the material to be shredded.
Do not spray ANY aerosol products on or in the vicin-
ity of the shredder as this might lead to combustion,
do not shred any materials which may have come into
contact with any combustible chemicals.
Avoid loose clothing like ties or jewellery touching the
shredder as they might be drawn into the shredder.
Avoid hair dangling over or touching the shredder as it
might be drawn into the shredder.
• Always turn the shredder off and unplug the power cord from
the AC outlet when not in use, before cleaning it, moving it, or
emptying the waste basket.
• RISK OF FIRE. Never use any petroleum based or flammable oils
or lubricants in or around the machine as some oils can combust
causing serious injury.
• ONLY USE NON-AEROLSOL VEGETABLE BASED OILS TO OIL YOUR
CUTTERS.
• NEVER dispose of flammable chemicals or materials that have
come into contact with flammable chemicals (for example, nail
polish, acetone, gasoline) in the shredder basket.
• Never shred large paper clips, envelopes (any window, insulated,
or with glued flaps), adhesive materials (labels, decals/stickers,
glued paper), newsprint, transparencies, laminated documents,
continuous forms, cardboard, or hard and plastic materials (ex-
cept Credit Cards and CD's).
• Do not hold CD/DVD with finger through the center ring while
feeding into the shredder. Serious injury may occur.
• Do not activate reverse function while shredding credit cards.
• A socket-outlet should be near the equipment and be easily ac-
cessible.
• Always turn the shredder off and unplug the power cord from
the AC outlet before cleaning it, moving it, or emptying the
waste basket.
• Never let the wastebasket become full. This will lead to shred-
ded material being pulled back up into the shredder and cause
jams.
• Never place the shredder near water or any heat source.
• Keep wastebasket emptied so that the shredder output is not
impeded.
2
• Do not use the shredder if the power cord is damaged in any
way.
•
Do not attempt to service this product yourself as doing so may
expose you to sharp cutting blades and/or electricity and will
void the manufacturer's warranty.
• Never try to clean or clear the shredder blade.
• Never shred beyond the specified sheet capacity. May result in
extensive damage to the machine.
ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PA-
PER
Heavier paper, humidity or other than rated voltage may reduce
shredding capacity.
InStAllAtIon
1. Make sure the basket door is securely closed shut. This shredder
features a safety power cut off and
will not operate if door is open.
Shredders with pull-out wastebas-
kets feature a safety power cut off
upon bin removal. The supplied
wastebasket activates this switch,
which allows the shredder to be
operable.
2. A socket-outlet should be near the equipment and be easily ac-
cessible.
C AUtIon !
Crosscut shredders have very sharp
exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
oPERAtIon
1) ContRol SWItCH
Using the switch located on the unit,
select one of the following settings
by sliding the switch either left or
right.
I AUto / on :
This setting allows the shredder to be automatically started
by inserting paper into the shred opening. Always feed the
paper in as straight as possible. When the paper has passed
through, the shredder will automatically stop.
t
W W W . Q - C O N N E C T . C O M