Use - Romus D-20L Manual De Instrucciones

USE

1. Power button (ON/OFF)
2. Humidity button (down)
3. Humidity button (up)
4. Fan Speed button
5. Timer button
6. Temperature button
1. Plug the unit into a correct mains socket. (Please refer to the rating label at the rear of
the unit for correct voltage/frequency.)
2. Press ON/OFF button to turn on the unit. The compressor will start to work.
3. Press Humidity UP/DOWN setting button to set working mode you will start to work.
3. Press Humidity UP/DOWN setting button to set working mode you need: continuous
working or humidity from 40%~80%; the display will show Humidity setting percentage (if
setting from 40%~80%, the humidity range will be up or down 5% on each single setting).
4. Press Fan speed button to set the ventilation speed, high or low. The relative indicator
will light on.
5. Press the TIMER button to set the operating hour you need (1~24 hours). The display
window will show the hour(s) you set when you press TIMER button, after releasing it for 8
seconds around, the display window will return to the room humidity. As the set time has
been reached, the compressor will stop working automatically.
6. Press the TEMP button, the display window will show the room temperature, after
releasing the button for 8 seconds around, the display window will return to the room
9 6 10 11 12
5
7. Power ON indicator
8. Water FULL indicator
9. Timer indicator
10. Fan Speed indicator (LOW)
11. Fan Speed indicator (High)
12. DISPLAY
www.romusworld.com www.romusworld.com
4 3 2
194407
EN
7
1
8
35